An improving Rheological Properties and Filter Loss of Water-Base Drilling Fluids Using Carboxymethyle Cellulose (CMC)

Author

By Abusabah.E.Elemam, Rashid.A.M.Hussien, Ahmed.A.Ibrahim, Sumya.A.Mohamed.

Abstracts

The aim of this study is to optimize the rheology and filter loss properties of Umm Ali clay to meet American Petroleum Institute (API) Specifications for drilling fluids.In This study, the effects of adding sodium carboxymethyle cellulose CMC to Umm Ali clay are shown in terms of filtration, plastic viscosity, viscometer dial reading600 rpm, gel strength, yield point, and shear rate and shear stress. A series of experimental tests carried out with different amount of CMC to determine the optimum value of CMC while monitoring filtration loss and rheological parameters.

References

  • 1. J.J.Azar and G.Robello Samuel (2007). Drilling Engineering. PennWell Corporation.
  • 2. Rashid.A.M.Hussein et al (2014), Assessment of the Effect of Increasing Local Bentonite Concentration on Drilling Fluids Rheology and Filtration Properties, SUST Journal of Engineering and Computer Science (JECS), Vol. 15, No. 1, p.p 26-34
  • 3. H.C.H. Darley and George R. Gray (1988). Composition and Properties of Drilling and Completion Fluids, Gulf Publishing Company.
  • 4. American Petroleum Institute (API) (2006) Specification 13A, Specification for Drilling Fluid Materials.
  • 5. American Petroleum Institute (API) (2003) Specification 13B-1, Recommended Practice for Field Testing Water-base Drilling Fluids.
  • 6. American Petroleum Institute (API) (2009) Recommended Practice 13D, Recommended Practice Rheology and Hydraulics of oil-well Drilling Fluids.
  • 7. G.V.CHILING ARIAN and P.VORABUTR (1983).Drilling and Drilling Fluids, Elsevier Science Publishing Company.

FULL Text